three lobes roots blower

1. Principle: The MFSR series of three lobe roots blower (Dry roots three lobes roots blower pump) is a constant volume-free internal compression blower (three lobes roots blower pump), It is by a pair of synchronized gear-driven, let a pair of high-precision constant reverse rotation of the rotor, the rotor and the housing capacity of the cavity formed by primitive closed volume of gas discharged from the inlet to the exhaust port to achieve the blower (Pumping gas) purpose of the volume of machinery.

2. Performance characteristics: The MFSR series of three lobe roots blower (Dry roots three lobes roots blower pump) In addition to the general blower’s(The following blowers and dry three lobes roots blower pumps are referred to as roots blower or blower) exhaust features(That boost or three lobes roots blower change, state of the blower inlet flow rate changes little), the blower does not contain oil and other transmission media, general characteristics, it also has its unique advantages: Using the world's most advanced back into the exhaust port and internal structure, effectively delay the return of high pressure gas shocks, so blower , the vibration and noise is significantly reduced.

1. Using advanced spiral back into the exhaust port and within the technique, the body effectively delayed the return of high pressure shock body, so fans, the noise is significantly lower.

2. Rotor the use of advanced composite curve and improve the efficiency of the blower.

3. Sealing structure is reasonable, oil and gas can not enter the device and therefore, the output air is clean, free of grease.

4. High precision, hardened gears, so that further increase machine life and reduce noise.

5. Rotor, cases, wall panels and other key components, to achieve the digital processing, improved product quality and production efficiency.

i, High-pressure Roots Blower Low noise
three lobes roots blower with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of blower can be significantly improved.

JHJHBJH
ii, High adiabatic efficiency
High-pressure Roots Blower with design of helical tri-lobe roots rotors, three lobes roots blower the airflow pulsation is less and the air streamline would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency can be raised up to 20%.

HJJHBJH
iii, High-pressure Roots Blower Super Energy saving
Compared to the typicalthree lobes roots blower under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20.