Roots Blower for aeration system sewage treatment

Product Description

Product Application

Three lobes roots air blower is a new product developed by our company based on the advanced technology features of types of Roots air blower at domestic and abroad. The development of roots air blower is based on the application of advanced CAD design and advanced processing technology, to ensure the fan performance, and our roots air blowers have been used widely in all kinds of industrial machines. Our roots air blowers have wide range of air flow, sub files, high pressure, and there are nearly 20 models, more than 100 kinds of specifications of three lobes roots air blowers.

Main Features

Accessory: suction silence (with air filter). Discharge silence, safety valve, pressure gauge, cock, vibration-isolating base, rubber vibration isolator, expansion joint, check valve, gate valve

1 positive displacement blower, no compression, air conveying is smooth, there is small flow rate changes along with pressure changes.

2, Special impeller of mesh curve and small enclosure make the roots blower high efficiency, low energy consumption, and it is a new energy-saving products.

3, High volume and anti-heat efficiency, so it is energy-saving. The blower rotor adopted the advanced Composite curve, the meshing is more reasonable, and further increases the volume efficiency.

4, Tri-lobe linear-shaped impeller making inlet and outlet pulsation quiet with low noise and vibration.

5, High-precision synchronous hard-toothed surface gears ensure long life.

6, doulbe-line bearing, can adjust the concentricity with strong fighting force, low vibration, moreover, and highly increase the life of the blowers.

7. Clean transported air without any oil-dust, as the blower sealing structure is reasonable, oil can not enter the chassis, thus the air is very clean.

Specification
1, High efficiency, low noise, small vibration and saving energy design.
2, Three lobes roots blower with long span life.
3, high accuracy,good performance, reliable operatio

Structure diagram

ZILI are Roots Blower for aeration system sewage treatment complete dilute phase conveying equipment supplier in China. We offer profesional customized system for each of our clients. Every solution begins with a thorough analysis of the customer's need.
As a Roots Blower for aeration system sewage treatment player in the market, ZILI has many experiences on designing conveying system. Whether your system locates outdoor or inside the plant. Our professional team helps you bulid safe and highly efficent plants.

As a kind of typical gas pressurization and conveying machinery, aeration roots blower in the specific pressure area has wide applicable characteristics. Roots Blower for aeration system sewage treatment The traffic is usually 0.5 ~ 800 m3 / min, up to about 1400 m3 / min, single stage work pressure of 53.3 ~ 98 kpa, two-stage series,aeration roots blower which can realize - 80 ~ 200 kpa.
JHGJHVHGV
In terms of application, most of Roots Blower for aeration system sewage treatment for the use of air blower. Their use in building materials, aeration roots blower electric power, metallurgy, chemical and petrochemical, mining, ports, textile, pharmaceutical, paper making, aquaculture and so on many fields. Using air tightness good sealing device, Roots Blower for aeration system sewage treatment also can be used to transport air outside of the gas, such as hydrogen, industrial oxygen, carbon monoxide, carbon dioxide, hydrogen sulphide, methane and acetylene, coal, etc.
KHJHVJDGAD