RSW/TRS high-pressure roots blower, 10000mmAq

RSW/TRS high-pressure roots blower

Application:

Transportation media: cleaning air, cleaning coal gas, S02 and other fuel gas. Chemical. dust of, backflow, food, metallurgy, fertilizer, steel, oxygen making, cement, electric power, textile, papermaking, petroleum, aqua farm, gas, wastewater, burned dust collecting after burning, RSW/TRS high-pressure roots blower, 10000mmAq dehydration, FGD, environment ventilation, liquid agitation, conveyance by air......etc.

Feature:

1. Wide range of capacity, pressure, RSW/TRS high-pressure roots blower, 10000mmAq Outlet:50mm-300mm(2"-12") Capacity:0.98m3/h-149.4m3/h(35-5336CFM) Pressure:8000mmAq-20000mmAq(0.8-2.0kgf/cm2)
2. When system resistance happens to change and the pressure could be automatic adjustment.
3. Forced flow characteristic, there would be few variation when pressure changed
4. High precision parts(first class gear, imported bearing, main parts are module between the our model)
5. During to discharge pressure has a small variation, bearing and gear can reduce torsion so as to steady run for a long time.
6. Rotor of special design which computerized balance to lower noise level and vibration, high efficiency, low consumption
7. Oil-free air
8. In the same rpm, 3-lobe roots blower has low noise level, low vibration and RSW/TRS high-pressure roots blower, 10000mmAq life

Construction:

Main projects:

i, High-pressure Roots Blower Low noise
RSW/TRS high-pressure roots blower, 10000mmAq with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of blower can be significantly improved.

JHJHBJH
ii, High adiabatic efficiency
High-pressure Roots Blower with design of helical tri-lobe roots rotors, RSW/TRS high-pressure roots blower, 10000mmAq the airflow pulsation is less and the air streamline would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency can be raised up to 20%.

HJJHBJH
iii, High-pressure Roots Blower Super Energy saving
Compared to the typicalRSW/TRS high-pressure roots blower, 10000mmAq under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20.