roots blower used in wastewater treatment two-lobe pump rings

Two lobe roots blowers is a new product developed by our company based on the advanced technology features of types of Roots air blower at domestic and abroad. The development of roots blower used in wastewater treatment two-lobe pump rings is based on the application of advanced CAD design and advanced processing technology, to ensure the fan performance, and our roots air blowers have been used widely in all kinds of industrial machines. Two lobe roots blowers have wide range of air flow, sub files, high pressure, and there are nearly 20 models, more than 100 kinds of specifications of three lobes roots air blowers.

JHBJHBJHB

Two lobe roots blowers is adopted for shielded wire of intake air and air exhausted of case of blower.Triangular air inlet constructed by bright wire at the top of rotor is opened in sequence through rotation of rotor,roots blower used in wastewater treatment two-lobe pump rings avoiding instantaneous opening or closing of air inlet and air exit,resulting in extremely small running noise,almost no air exhaust pulsating movement.

KJHHBCDV
High efficiency.Two lobe roots blowers is adopted for rotor,facilitating keeping mutual clearance between rotors,no need to consider slight axial change causing rotors mutually contact,just as rotor of spiral type,thus making efficiency further elevate.Low vibration.As precise digital control machine toolroots blower used in wastewater treatment two-lobe pump rings is adopted for machine of rotor,and adopting high precision dynamic balance is adopted to conduct balancing,therefore there is almost no vibration for running of blower.

$keyword$

Our products:

1,Air handing unit

2,Dust collector

3,Air/fire damper

4,Diesel generator

5,Mine tunnel fan

6,Axial and Centrifugal fan

Main Features:

i, Low noise
with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the

airflow noise is much lower compared to typical straight-lobe roots blower. The noise level

can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of

blower can be significantly improved.

ii, High adiabatic efficiency

with design of helical tri-lobe roots rotors, the airflow pulsation is less and the air streamline

would be more stable. Therefore the fluctuation in airflow is less and then the energy waste

can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design

of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency

can be raised up to 20%.

iii, Super Energy saving

Compared to the typical roots blower under the same operation conditions of discharge

pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be

lower by 20

Customers Visiting

$keyword$

Click below to contact us !