Positive displacement blower/Roots Blower/High-Pressure Blower

Product types:

(1)Roots Blower:MFSR40, MFSR50, MFSR65, MFSR80, MFSR100, MFSR125, MFSR125-1, MFSR150, MFSR175, MFSR200, MFSR250, and MFSR300
Capacity: 0.41m3/min-165.32m3/min
Pressure: 9.8kpa-58.8kpa
(2)Intensive Roots Blower: MJ50, MJ65, MJ80, MJ100, MJ125, MJ150, MJ175, MJ200,
Capacity: 0.67m3/min-59.20m3/min
Pressure: 9.8kpa-73.5kpa

(3)High-Pressure Roots Blower: MFSR50H, MFSR65H, MFSR80H, MFSR100H, MFSR125H, MFSR150H, MFSR175H, MFSR200H, MFSR250H, and MFSR300H
Capacity: 1.21m3/min-134.1m3/min
Pressure: 29.4kpa-98.8kpa

(4)Roots Positive displacement blower/Roots Blower/High-Pressure Blower Pump: MFSR50V, MFSR65V, MFSR80V, MFSR100V, MFSR125V, MFSR150V, MFSR175V, MFSR200V, MFSR250V, and MFSR300V.
Capacity: 0.86m3/min-136.3m3/min
Pressure: -1360mmAq--- -4488mmAq

Features:

1. low noise three lobes roots blower
   2.energy saving
   3purify water and air and other pollutants efficiently
   4.high efficiency

1. Low noise, due to the helical suction and discharge, the blower air flow in and out according to the direction of spiral line, all these prevent the pulse noise and vibration. What's more, by using the Impedance complex muffler, the noise of our blowers are further reduced.

2. High volume and anti-heat efficiency, so it is energy-saving. The blower rotor adopted the advanced Composite curve, the meshing is more reasonable, and further increases the volume efficiency.

3. Stable performance. The blower rotor, casing, wall panels, shaft and other key components are all produced by the advanced digital-control processing equipment thus make the interchangeability of parts and components increased.

4. Low vibration. Although the rotor has been processed precisely, and are all in balancing condition, we still adopted the high precision balancing equipment and grinding machine to make it more balance. Therefore, the blowers are almost no vibration.

5. With high precise and hardness Synchronization gear, we not only extension blowers life, but also reduce its noise.

6. Our blower bearing is introduced from Japan and Sweden. There are two lubrication styles: Fat grease (below 58.8kpa), oil splash grease (58.8kpa—98.8kpa), which makes the product quality more liable.

7. The transported air is clean and without any oil-dust, as the blower sealing structure is reasonable, oil can not enter the chassis, thus the air is very clean.

8. Low price: As we have our own produce line so the price of our blower is very competitive.

9. Advanced technology and accessory, we introduced advanced blower manufacture technology from Japan and many of our accessories are imported, such as Japan NSK Bearing and Sweden SKF bearings, imported Gear, and Germany OPTI belt and so on.

10. Long life. The blower bearing what we used are all double-row and Self-aligning bearing.

11. The blower rotor is precision machined in its full surface, and since it is balanced precisely, it is almost without any vibration.

12. Case Material: HT250, Impeller Material: HT250,Gear Material:20CrMnTi.

13. Widely used in many fields, especially in gas transportation, waste water treatment, aquaculture, pneumatic transport, Positive displacement blower/Roots Blower/High-Pressure Blower packing, oxygen generation, etc.

14.Oil tank: after milling they are all polished by digital grinding machine, in order to prevent the grear from broken because of oil leakage.

15. Bearing:Our bearing are doulbe-line bearing, can adjust the concentricity, and they are all strong fighting force, low vibration, moreover, and highly increase the life of the blowers.

16.Mercury column detecor: we test the air capacity and pressure through it, and makes the result very precise, and avoid the artificial error

NOTICE FOR ORDER

when you buy a blower,please notise the fllowing items:

1. application: Sewage treatment, aquaculture, air transport,etc.

2. Transport medium: air etc.

3. operational environment: in doors, out doors,etc.

4, requirements of operating condition: capacity, pressure, temperature,etc.

5. motor: need or not.

As a kind of typical gas pressurization and conveying machinery, aeration roots blower in the specific pressure area has wide applicable characteristics. Positive displacement blower/Roots Blower/High-Pressure Blower The traffic is usually 0.5 ~ 800 m3 / min, up to about 1400 m3 / min, single stage work pressure of 53.3 ~ 98 kpa, two-stage series,aeration roots blower which can realize - 80 ~ 200 kpa.
JHGJHVHGV
In terms of application, most of Positive displacement blower/Roots Blower/High-Pressure Blower for the use of air blower. Their use in building materials, aeration roots blower electric power, metallurgy, chemical and petrochemical, mining, ports, textile, pharmaceutical, paper making, aquaculture and so on many fields. Using air tightness good sealing device, Positive displacement blower/Roots Blower/High-Pressure Blower also can be used to transport air outside of the gas, such as hydrogen, industrial oxygen, carbon monoxide, carbon dioxide, hydrogen sulphide, methane and acetylene, coal, etc.
KHJHVJDGAD